The new 2mm Steel Trimdek® Notched Mesh Rolls make the installation process faster and neater on your Trimdek® style roof.
Faster and neater installation
The roll is already pre-cut to fit your Trimdek® style roof – just place the mesh
over the roof and screw it in place.
This saves you time from cutting the mesh, and ensures that the mesh
is neatly notched according to the groove of the roof.
300mm wide
The Steel Trimdek® Notched Mesh Rolls are available in 300mm widths,
to suit standard Trimdek® roof installations.
Bushfire and Ember Guard Compliant
The 2mm Steel Trimdek® Mesh Roll complies as an ember guard*
by meeting the following requirements:
- Made from a non-combustible mesh or perforated sheet
- An aperture (hole size) of 2mm or smaller
- Compliant for BAL 12.5, 19, 29, 40 or FZ
*Australian Standard AS3959-2009 Construction of Buildings in Bushfire-Prone Areas
Available in 5 popular roof colours
Our 2mm Steel Trimdek® Notched Mesh Rolls come in the following colours
from the COLORBOND® range:
