The existing method of installing mesh onto a Klip-Lok® roof requires notching and screwing mesh onto the end of the sheet. This method is quite labour intensive and limited by the roof angle and proximity of the roof sheet to the edge of the gutter.
The Blue Mountain Co Gutter Mesh Klip-Lok® saddle alleviates this issue by allowing installers to notch a U-shape into the mesh and secure it to the roof.
This new installation process is much simpler and neater and allows the mesh to shed debris more easily whilst increasing the potential water capture.
The Klip-Lok® saddle fits a range of Klip-Lok® roof profiles such as:
The new saddle and U-shaped notch technique makes it much easier to install onto Klip-Lok® profiles
when box gutters are used, particularly if mounting to a parapet wall.
Klip-Lok® and Lysaght® are trading names and registered trade marks of BlueScope Steel Limited. KingKlip® is a registered trademark of Fielders. Metlok® is a registered trade mark of Metroll Pty Limited. Stramit Speed Deck Ultra® is a registered trademark of Stramit Corporation Pty Limited. All rights reserved.